Technika
Technika V Super 69

3.205 x 2.93, cast aluminum. Double circular light lip (2.694 and 2.525) located on the rear, off-center of the lens board. Edge thickness is .0710. Bottom and top corners cut at an angle and a notch present in the center. Small notch on left side.

This is a special order item.

Technika 4×5

3.868 x 3.773, cast aluminum. Double circular light lip (3.45 and 3.39) loacted on the rear, off-center of the lens board. Edge thickness is .075. Bottom corners cut at an angle and a notch present in the center. Original Technika boards have the shutter hole located off-center in the light lip to align the center of the lens with the film plane. (Approx. 5mm – 6mm down). Other brands use the center of the light lip as the shutter location.

Extenstion tubes for this lens board.

4″ Deardorff adapters.

We carry a generic version of this lens board. This is a stocked item.

Technika III

3.94 x 3.66, machined aluminum. Features a .02″ deep off-center circular light goove on the rear. Overall thickness is .06.

Duplicate lens boards bored to fit a standard #0 shutter are in stock. Boring the boards to a specified dimension is at additional cost.

Technika 5×7

5.1″ (130mm) square aluminum. Features a .05″ deep off-center circular light goove on the rear and a small notch centered on the bottom edge. Overall thickness is .083.

Duplicate lens boards bored to fit a standard #0 shutter are in stock. Boring the boards to a specified dimension is at additional cost.

Duplicate lens boards are in stock. This is a good candidate for a lensboard adapter.

Technika 11×14

6.37 (162mm) square aluminum board featuring a glued-on 5.93 plastic plateau with 3/16″ radiused corners. Lip thickness is.085. Overall thickness is .24.

A good candidate for a lensboard adapter. This is a special order item.

© 2016 S.K. Grimes
Designed by NextStep4u.com
css.php